Cirrus Logic CobraNet - Manual (Page 79)

CobraNet Programmer’s Reference
Management Interface Variable Reference
DS651PM25
©
Copyright 2006 Cirrus Logic, Inc. 79
6.4.6 Conductor Information
These conductor variables give a description and status of the current conductor of the
CobraNet network.
Name
condInfoPriority
Description
Conductor priority of the current conductor.
1 - Lowest conductor priority
255 - highest conductor priority
If the priority of the current conductor is adjusted,
condInfoPriority will change to reflect this.
Dependent on priority setting of other devices on the network, a change in current conductor priority
does not necessarily induce a change in conductor and
condInfoMAC.
Host Address
0x11001
SNMP Object ID
1.3.6.1.4.1.2680.1.1.4.5
Type
Integer
Attributes Read-only
Implemented Version
2.9.12 (24-bit platforms only.) Not available on 32-bit patforms.
Name
condInfoMAC
Description
Ethernet MAC address of the current conductor.
condInfoMAC should read 00:00:00:00:00:00 if there is no conductor on the network. There is no
conductor if there is 0 or 1 CobraNet device(s) attached to the network or if all CobraNet devices
have a condPriority setting of 0.
Host Address
0x11002
SNMP Object ID
1.3.6.1.4.1.2680.1.1.4.6
Type
Physical Address
Attributes
Read-only
Implemented Version 2.9.12 (24-bit platforms only.) Not available on 32-bit patforms.
Name
condInfoLastChange
Description
sysUpTime value at time of last change to condInfoMAC.
Host Address
0x11005
SNMP Object ID
1.3.6.1.4.1.2680.1.1.4.7
Type Time Ticks
Attributes
Read-only
Implemented Version
2.9.12 (24-bit platforms only.) Not available on 32-bit patforms.