Cirrus Logic CobraNet User Manual
Page 133
CobraNet Programmer’s Reference
Error Code Reference
DS651PM25
©
Copyright 2006 Cirrus Logic, Inc.
133
Byte
Code
Flash
Code
Type Name Description
Expected
Conditions
Unexpected
Conditions
58 5,7,2
TXFAULT
QUEUEPUT_ORDER
Queue overflow
preparing packets
for transmission.
- -
59 7,7,2
RXQUIET MISMATCH_CNVERSION
Protocol minor
version mismatch.
CobraNet silicon
receiver running
pre-2.10.4 firmware
connected to CM-1
or Refer running
pre 2.9.0 firmware.
-
60 1,8,2 TXQUIET
TXAUDIO_DROPOUT
Audio dropout
occurred on
transmission.
Conductor revoked
permission,
channel number
changed or turned
off by user. A beat
packet did not
arrive either due to
a conductor
change or a
problem on the
network.
-
61 3,8,2
RXQUIET
RXAUDIO_DROPOUT
Audio dropout
occurred on
reception.
Conductor revoked
permission,
channel number
changed or turned
off by user. Audio
packet was
dropped by the
network.
-
62 5,8,2
TXFAULT
TXFREE_TWICE
A transmit buffer
was freed twice.
- -
63 7,8,2
RXFAULT
RXPACKET_BOUNDS
DMA reports
receiving an packet
outside designated
receive buffer
address range.
-
DMA hardware is
misbehaving.
64 1,1,3
TX
QUEUEPUT_SCICRX
Serial bridge can't
packetize and
transmit characters
as fast as they're
being received
from the serial port.
serialPPeriod
setting too high for
selected baud rate.
-
65 3,1,3 FATAL
IP_ASSERTFAIL
Programmer
assertion failure in
ip.asm
- -
66 5,1,3 FATAL
QUEUEPUT_FLASHREQ
Queue overflow
initiating a flash
read, write or
erase.
-
A request has
been resubmitted
before it was
completed. Flash
request queue size
needs to be
increased due to
software
expansion.