Cirrus Logic CobraNet - Manual (Page 90)

90
©
Copyright 2006 Cirrus Logic, Inc. DS651PM25
CobraNet Programmer’s Reference
Management Interface Variable Reference
Name hackStatus
Description
Indicates the source of a HACK assertion requiring acknowledge. The following values may be OR’d
together. Undocumented bits should be ignored:
0x01 - A new receive packet is available in the receive buffer. Host should read packet data from
receive buffer and then acknowledge receipt.
0x02 - No transmission in progress. Host may write transmit packet data into the transmit buffer.
On 32-bit platforms, these bits may also be read in the HMI status register
Received packet
available and Packet transmission complete.
Host Address
0x25100
SNMP Object ID
Not available via SNMP
Type Integer
Attributes Read-only
Implemented Version
2.8.5
Name
hackTranslations
Description
Incremented when a translate address command completes.
On 32-bit platforms, this information is also available through the
Translation Complete bit in the
HMI status register.
Host Address 0x25101
SNMP Object ID Not available via SNMP
Type
Counter
Attributes
Read-only
Implemented Version
2.8.5
Name
hackSNMPModify
Description Copy of miMonSNMPDirty.
Host Address
0x25102
SNMP Object ID
Not available via SNMP
Type
Counter
Attributes
Read-only
Implemented Version
2.8.5