Cirrus Logic CobraNet - Manual (Page 71)

CobraNet Programmer’s Reference
Management Interface Variable Reference
DS651PM25
©
Copyright 2006 Cirrus Logic, Inc. 71
Name
flashTAcknowledge
Description
A semaphore variable updated to the value of flashTRequest on completion of a flash write.
Host Address 0x1006
SNMP Object Identifier
Not available via SNMP
Type
Integer
Attributes
Read-only
Implemented Version
2.8.6
Name flashPersistEnable
Description
Non-zero value enables variable persistence feature. Read/write - Persistent type variables will be
automatically written to non-volatile memory when changed. Values will be restored on power-up.
Host Address
0x1100
SNMP Object ID
1.3.6.1.4.1.2680.1.1.2.7
Type Integer
Attributes Read/write - Persistent
Default Value
0
Implemented Version
2.8.1
Name
flashPersistAck
Description
Forces a write of variables to non-volatile memory when set to a non-zero value. Value returns to
zero when write has completed. This value will not change if persistence is disabled. This feature is
recommended for use during factory configuration where writing and confirmation of success must
be done in a timely manner. In normal use it is best to let the interface schedule writes to non-
volatile memory. Over-use of this feature can result in excessive wear on the flash device.
Host Address
0x1200
SNMP Object ID
1.3.6.1.4.1.2680.1.1.2.8
Type
Integer
Attributes
Read/Write
Default Value 0
Implemented Version
2.8.1