Cirrus Logic CobraNet - Manual (Page 45)

CobraNet Programmer’s Reference
Management Interface Variable Reference
DS651PM25
©
Copyright 2006 Cirrus Logic, Inc. 45
6.3.3 Address Translation
The Address Translations are deprecated. These variables are no longer available via
SNMP.
Name
atIfIndex
Description
The interface on which this entry's equivalence is effective. The interface identified by a particular
value of this index is the same interface as identified by the same value of
ifIndex.
Host Address 0x120000
SNMP Object ID
Not available via SNMP
Type
Integer
Attributes
Read-only
Default Value
1
Implemented Version 2.1.0
Name
atPhysAddress
Description
MAC address of the device. Use of ifPhysAddress is preferred for determining the MAC address.
Host Address
0x120001
SNMP Object ID
Not available via SNMP
Type PhysAddress
Attributes
Read-only
Default Value
As assigned by manufacturer
Implemented Version
2.1.0
Name
atNetAddress
Description
IP address of the device. Obtaining the IP address via SNMP should not be a necessary operation -
you need to know the IP address in order to send the query. Via HMI, the IP address may be
monitored and manipulated via the IP Monitor variables.
Host Address 0x120004
SNMP Object ID
Not available via SNMP
Type
IpAddress
Attributes
Read-only
Default Value As assigned by RARP, BOOTP or IP monitor variables.
Implemented Version 2.1.0