Cirrus Logic CobraNet - Manual (Page 114)

114
©
Copyright 2006 Cirrus Logic, Inc. DS651PM25
CobraNet Programmer’s Reference
Management Interface Variable Reference
6.4.15 MI Monitor
Name miMonDirty
Description
Incremented when a management interface variable is modified either via SNMP or HMI. Multiple
modifications may result in a single increment of this counter. The act of writing a variable, even if
written with its current value, is considered a modification for the purposes of this counter.
Host Address
0x71000
SNMP Object ID
1.3.6.1.4.1.2680.1.1.9.1.1
Type
Counter
Attributes Read-only
Default Value 0
Implemented Version
2.6.3 (available via SNMP in 2.6.4)
Name
miMonSNMPDirty
Description
Incremented if a management interface variable is modified through SNMP. The counter is intended
to allow detection of variable modification by any SNMP manager. Multiple modifications may result
in a single increment of this variable. The act of setting a variable, even if set to its current value, is
considered a modification for the purposes of this counter.
Host Address 0x71001
SNMP Object ID
1.3.6.1.4.1.2680.1.1.9.1.2
Type
Counter
Attributes
Read-only
Default Value
0
Implemented Version
2.6.5
Name
miMonHMIDirty
Description
Incremented if a management interface variable is modified through HMI. The counter is intended to
allow detection of variable modification by a local manager. Multiple modifications may result in a
single increment of this variable. The act of writing a variable, even if written with its current value, is
considered a modification for the purposes of this counter.
Host Address 0x71002
SNMP Object ID
1.3.6.1.4.1.2680.1.1.9.1.3
Type
Counter
Attributes
Read-only
Default Value
0
Implemented Version 2.6.5