Horner APG RCX HE500OCX003 - Manual (Page 7)

OCX003 19 MAR 2003 PAGE 7
Information is subject to change without notice. Cscape is a trademark of Horner APG, LLC.
6.2
Digital Output
7 INSTALLATION / SAFETY
a. All applicable codes and standards should be followed in the installation of this product.
b. Shielded, twisted-pair wiring should be used for best performance.
c. Shields may be terminated at the module terminal strip.
d. In severe applications, shields should be tied directly to the ground block within the panel.
e. Use the following wire type or equivalent: Belden 8441 or equivalent.
For detailed installation information, refer to Mini Hardware Manual. A handy checklist is provided that
covers panel box layout requirements and minimum clearances.
8 TECHNICAL ASSISTANCE
For assistance, contact Technical Support at the following locations:
North America:
(317) 916-4274
www.heapg.com.
Europe:
(+) 353-21-4321-266
www.horner-apg.com
0 10 20 30 40 50 60
°°C
32 50 68 86 104 122 140
°°F
0
.1
.2
.3
.4
.5
AMPS / CHANNEL
Derating Chart