Horner APG QX651 OCS - Manual (Page 12)

MAN0543-03 05 MAR 2003 PAGE 12
Figure 19 - RS-485 Port (Port 3)
2.10
CE Requirement for Ethernet Modules (OCS301 / OCS351)
To maintain FCC and CE Radiated Emissions limits, you must install a ferrite (part number: 0461164181
available from Fair-Rite Corporation) within 25mm from the OCS end of the Ethernet cable. This
requirement applies to Ethernet Modules OCS301 and OCS351.
3 SAFETY
All applicable codes and standards need to be followed in the installation of this product.
4 TECHNICAL ASSISTANCE
For assistance, contact Technical Support at the following locations:
North America:
(317) 916-4274
www.heapg.com
Europe:
(+) 353-21-4321-266
www.horner-apg.com
Shielded Cable
Send Data (-)
To RS-485 Port
SG
Send Data (+)
Receive Data (-)
Receive Data (+)
SG 7
-SD 13
Port 3
+SD 12
-RD 25
+RD 24
FG 1
Signal Pin No.