Ashcroft ATE-2 - Handheld Calibrator - Manual (Page 53)

51
SECTION 15 l. FIRMWARE UPDATE CONT.
Select the appropriate COM port.
TIP: When you pull DOWN “Select Com Port” it scans your
computer and presents a list of available COM Ports. If you do
this before and after connecting the USB cable to the HCC, you
should see an extra com port with the HHC connected. Select
that new port. If the HHC does not appear as a COM Port, make
sure that you have installed the FTDI USB Driver.
Ꮨƽ