Ashcroft ATE-2 - Handheld Calibrator - Manual (Page 30)

28
SECTION 15 c. ENGINEERING UNITS SELECTION
Auto Off Modes
Power Off…
Backlight Off…
Power Off Times
Never
5 Minutes
15 Minutes
30 Minutes
60 Minutes
Select Ch1 Unit
psi
inH2O
inHg
kPa
1 of 13 units
Press ENTER
Use DOWN or UP ARROW to highlight “Auto off timer…”
Press ENTER
Use DOWN or UP ARROW to highlight “Power off”…
OR
Use DOWN or UP ARROW to highlight “Backlight off”…
Press ENTER
Use DOWN or UP ARROW to highlight desired time in minutes or
“Never”
Press ENTER
HHC will return to Measurement Mode with values being saved
Select Engineering Units
Press MENU key
Press DOWN or UP ARROW key to highlight “Units…”
Press ENTER
Press DOWN or UP ARROW key to highlight “Select Units”
Press ENTER
Press DOWN or UP ARROW key to highlight “Channel 1
Module”, “Channel 2 Module”
Press ENTER
Press DOWN or UP ARROW key to highlight desired engineering
unit
Press Enter to select unit and exit to Measurement Mode.
Note: The HHC has 99,999 counts of resolution. The display is
capable of displaying five digits up to 99,999. Selecting engineer-
ing units which approach 99,999 counts of resolution could result
in the least significant digits to appear unstable.
Note: Units of measure whose full scale value exceeds 99,999
will not be available to be selected.
SECTION 15 b. iii Program Auto Off Timers Cont.
Ꮨƽ