MagTek IntelliStripe65 99875161 - Manual (Page 64)

IntelliStripe 65 Command Reference
58
LATCH CARD COMMAND
Command ID: 80 (Hex)
Description:
This command attempts to engage the card latch. To properly latch a card, this command should
only be executed when the Card Seated indicator is set thus indicating that the card is fully
inserted into the reader. The Card Latched indictor is set to 1 after this command is sent.
Request Message Data: None
Response Message Data: None
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.
Example Request:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 00 82 80 00
Example Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 82 80 00
UNLATCH CARD COMMAND
Command ID: 81 (Hex)
Description:
This command attempts to disengage the card latch. The Card Latched indictor is set to 0 after
this command is sent.
Request Message Data: None
Response Message Data: None
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.
Example Request:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 00 82 81 00
Example Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 82 81 00