MagTek IntelliStripe65 99875161 - Manual (Page 53)

Section 5. Smart Card Application
47
Example Request:
Field MTYP APPL CMND RC DATA
Byte 1 2 3 4 5-11
Value (Hex) 00 02 84 00 00 A4 02 0C 02 00 01
Example Response:
Field MTYP APPL CMND RC DATA
Byte 1 2 3 4 5-6
Value (Hex) 40 02 84 00 90 00
APDU EXCHANGE COMMAND
Command ID: 85 (Hex)
Description:
This command is used to exchange an APDU with a card. See ISO 7816-4 and EMV for
information on APDU structure. This command functions differently for T=0 and T=1
protocols:
For T=0, the Command APDU is mapped onto TPDU’s and the exchange is managed
according to EMV rules, returning a Response APDU.
For T=1, the Command APDU is sent directly to the card and the Response APDU is
returned.
For Memory cards, the Command APDU is interpreted and the appropriate Control
Sequence is sent to the card. A Response APDU is returned.
Request Message Data:
Byte Field Description
1-n Command APDU Command APDU per ISO 7816-4 and EMV
Response Message Data:
Byte Field Description
1-n Response APDU Response APDU per ISO 7816-4 and EMV
Response Message Result Codes:
Code (Hex) Meaning
00 Success, the command completed without problems
01 Failure, the command was not able to complete, see CondRpt property for
details. See T=0 or T=1 Error/Warning Condition Templates for Template
construction.
02 Warning, the command completed, but some problems arose, see CondRpt
property for details. See T=0 or T=1 Error/Warning Condition Templates
for Template construction.