MagTek IntelliStripe65 99875161 - Manual (Page 45)

Section 5. Smart Card Application
39
Bytes Meaning
41 TBi for T=1 Present? 0 = no, 1 = yes
42 TBi for T=1 value
If TBi for T=1 Present = 1, as received from the card
If TBi for T=1 Present = 0, 0x4D
43 TCi for T=1 Present? 0 = no, 1 = yes
44 TCi for T=1 value
If TCi for T=1 Present = 1, as received from the card
If TCi for T=1 Present = 0, 0x00
45 T=15 Present? 0 = no, 1 = yes
46 TAi for T=15 Present? 0=no, 1=yes
47 TAi for T=15 value
If T=15 Present = 1, as received from the card
If T=15 Present = 0, 0x01
48 Convention, 0 = direct, 1 = inverse
49 FI, see ISO 7816-3(1997)
50 DI, see ISO 7816-3(1997)
51 II, see ISO 7816-3(1997)
52 PI1, see ISO 7816-3(1997)
53 N, see ISO 7816-3(1997)
54 Specific Mode Indicator, 0 = Negotiable, 1 = Specific
55 Specific Protocol
56 Specific Mode Implicit Parameters Requested? 0 = no, 1 = yes
57 Specific Mode Changeable, 0 = Changeable, 1 = Not Changeable
58 PI2 Present? 0 = no, 1 = yes
59 PI2 value
If PI2 Present = 1, as received from the card
If PI2 Present = 0, ignore the value
60 WI
61 Clock Stop Allowed Indication
0 = never
1 = stop clock low
2 = stop clock high
3 = stop clock high or low
Note: This is an indication of what stop clock modes are possible for the card, the
IFD does not put a capable card into the clock stop mode.
62 Classes supported by the card
1 = 5 volts only
2 = 3 volts only
3 = both 5 and 3 volts
63 IFSC being supported by the card
64 CWI
65 BWI
66 Error Detection Code
0 = LRC
1 = CRC