AMETEK 2110 Shut Height Monitor - Manual (Page 6)

Installation and Programming Manual 2
Chapter 2: Hardware Overview
3 Installation and Programming Manual
Chapter 2: Hardware Overview
Chapter 2: Hardware Overview
The shut height monitor contains a heavy-duty case which can hold up to five modules:
n Power Supply
n Controller (CPU)
n Digital Output (optional)
n Analog Output (optional)
n Resolver Input (optional)
n Linear Displacement Transducer L1 (optional)
n Linear Displacement Transducer V1 (optional)
n Relay Output (optional)
The shut height monitor’s faceplate contains a 6-digit, seven-segment LED display and four
programming keys. The LED display is used to indicate the shut height position as well as to
enter parameters when programming. The programming keys are used to program the monitor.
Ten small status LEDs are also provided. These LEDs are used to indicate the state of the
monitor during machine operation.
Figure 2-1 Shut Height Monitor
T13692 chapter 2.indd 3/17/04, 6:29 AM 2