Vaisala WXT520 - Manual (Page 78)

User’s Guide ______________________________________________________________________
76 __________________________________________________________________ M210906EN-C
Combined Data Message (aR)
With this command you can request all individual messages aR1, aR2,
aR3 and aR5 with just one command.
Command format: aR
Example of the response:
0R1,Dm=027D,Sm=0.1M
0R2,Ta=74.6F,Ua=14.7P,Pa=1012.9H
0R3,Rc=0.10M,Rd=2380s,Ri=0.0M,Hc=0.0M,Hd=0s,
Hi=0.0M
0R5,Th=76.1F,Vh=11.5N,Vs=11.5V,Vr=3.510V,Id=HEL___>
Composite Data Message Query
(aR0)
This command is used to request a combined data message with user
configurable set of wind, pressure, temperature, humidity, precipitation
and supervisor data.
Command format: aR0
where
a
= Device address (default = 0)
R = Combined message query command
= Command terminator
where
a
= Device address
R0 = Composite data message query command
= Command terminator