Chapter 8 sensor and data message settings, Wind sensor, Checking the settings (awu) – Vaisala WXT520 User Manual
Page 109: Chapter 8, Chapter 8, sensor and data message settings, on, Rable update interval, see, Chapter 8, sensor, The data is outputted on, In the response message, see, Parameters, see
Chapter 8 ____________________________________________ Sensor and Data Message Settings
VAISALA______________________________________________________________________ 107
CHAPTER 8
SENSOR AND DATA MESSAGE
SETTINGS
This chapter presents the sensor configuration and data message
formatting commands for all communications protocols: ASCII,
NMEA 0183 and SDI-12.
Sensor and data message settings can also be done by using the Vaisala
Configuration Tool software.With this software tool you can change the
device and sensor settings easily in Windows® environment. See
.
Wind Sensor
Checking the Settings (aWU)
With the following command you can check the current wind sensor
settings.
Command format in ASCII and NMEA 0183: aWU
Command format in SDI-12: aXWU!