Heating function, Optional software for easy settings – Vaisala WXT520 User Manual
Page 20
User’s Guide ______________________________________________________________________
18 __________________________________________________________________ M210906EN-C
Weather Transmitter WXT520 is a small and lightweight transmitter
that offers six weather parameters in one compact package. WXT520
measures wind speed and direction, precipitation, atmospheric pressure,
temperature and relative humidity. The transmitter housing is IP65/IP66
rated.
WXT520 powers up with 5 ... 32 VDC and outputs serial data with a
selectable communication protocol: SDI-12, ASCII automatic & polled
and NMEA 0183 with query option. Four alternative serial interfaces
are selectable: RS-232, RS-485, RS-422, and SDI-12. The transmitter is
equipped with a 8-pin M12 connector for installation, and a 4-pin M8
connector for service use.
The following options are available:
-
Heating function for the precipitation and wind sensors
-
Service Pack 2: Windows
®
based Vaisala Configuration Tool
software with USB service cable (1.4m)
-
USB RS-232/RS-485 cable (1.4m)
-
Mounting kit
-
Bird spike kit
-
Surge protector
-
Shielded cables (2m, 10m, 40m)
-
Bushing and grounding kit
Heating Function
To improve the accuracy of measurements an optional heating for the
wind and precipitation sensors is available. More about heating in
section
The heating function option must be chosen when placing the order.
Optional Software for Easy Settings
Windows
®
based Vaisala Configuration Tool is a user friendly
parameter setting software for WXT520. With this software tool you
can change the device and sensor settings easily in Windows
®