Vaisala Hydromet Data Collection Platform - Manual (Page 319)

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 317
9. In the Reports view, create a report and link it to the virtual COM
port for sending data to the data acquisition system. See
Figure 156
on page 317 .
0710-120 Figure 156 Linking Report to Virtual COM Port
From the QML application point of view, sending reports to virtual
COM ports is the same as sending reports to a physical serial port.
10. Using Custom Template, create an HTML-formatted report:
- Click the Load ASCII Template button and import template
QML201.html; templates can be found in the same directory
as the setup.
- Link setup variables to the template as follows:
Table 68 Setup Variables Linked to HTTP-Formatted Report
Tag Source Variable
sname SParServer sname
base1 CT25K_1 base1
base2 CT25K_1 base2
base3 CT25K_1 base3
vvis CT25K_1 v_vis
extdc Charger External_DC
warn Sysinfo warning
err Sysinfo errors