Vaisala Hydromet Data Collection Platform - Manual (Page 240)

User's Guide ______________________________________________________________________
238 _________________________________________________________________ M210933EN-C
E-Mail (SMTP) Client
The QML logger e-mail client functionality provides a means for
sending QML logger reports via e-mail using the SMTP protocol. Using
the SMTP client functionality requires a TCP/IP based connection to an
SMTP server. Typical use is sending alarm messages triggered by, for
example, observation value limits, door switch, or battery charge levels.
A buffering mechanism is used for outgoing data, so in case of a
network failure, data will be temporarily stored by the QML logger, and
sent when communications are restored. SMTP clients are configured in
the IP Services view as shown in
Figure 105 on page 238 .
0803-053 Figure 105 IP Services
NOTE The SMTP client does not support authentication extensions. It can
typically be used only on closed networks, or networks where user
identification is externally provided by means such as a SIM card or
device identification on cellular networks.