Configuring serial sensor interfaces – Vaisala Hydromet Data Collection Platform User Manual
Page 110

User's Guide ______________________________________________________________________
108 _________________________________________________________________ M210933EN-C
Configuring Serial Sensor Interfaces
This section contains information needed when configuring serial
sensor interfaces, that is, connecting sensors that use serial
communications to the weather station. This section contains only
instructions for configuring the interface, not the sensor itself.
Interfaces of the following sensors are covered:
-
Present Weather Sensor
-
Visibility Sensor
-
Ceilometers
-
Digital Barometer
-
Ultrasonic Wind Sensor
-
Wind Transmitters
-
Vaisala All-Weather Precipitation Gauge VRG101
-
Garmin GPS 35-PC GPS Receiver
For most of the sensors, wiring depends on the application. You should
therefore also have additional delivery-specific wiring instructions and
drawings available.
NOTE
This chapter contains only instructions for configuring the interface,
not the sensor itself. In addition to this document, you will need the
appropriate sensor user manual to manage the sensor configuration
and hardware setup.