Vaisala Hydromet Data Collection Platform - Manual (Page 141)

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 139
Command Timeout
The Timeout value in milliseconds is used for all other modem
commands except for initialization (no response tests) and dial (own
timeout). If the modem does not respond during this time, the sequence
is aborted and a warning is issued.
Esc Delay
The Esc delay parameter defines the delay in milliseconds between the
+ characters when sending the control sequence.
Command Delay
The Command delay parameter defines the delay in milliseconds
between each command when sending modem commands separated by
.
Dial Timeout
The Dial timeout parameter defines the time in seconds to be waited
after a dial command for either connect or dial failed indication from the
modem. If neither is received during this period, the sequence is aborted
and a warning is issued.
Dial Retry Delay
The Dial retry delay parameter defines the time in seconds to be waited
after a failed call, caused by, for example, a busy line, before redialing.
NOTE This parameter is only available on the Advanced user level.
NOTE This parameter is only available on the Advanced user level.
NOTE This parameter is only available on the Advanced user level.