Advantech INTEL AIMB-210 - Manual (Page 35)

23 AIMB-210 User Manual
Chapter 2
C
onnecting
Peripherals
2.11 Front Panel Connectors (JFP1/JFP2/JFP3)
There are several external switches to monitor and control the AIMB-210.
2.11.1 ATX soft power switch (JFP1 / PWR_SW)
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to (JFP1/PWR_SW). This connection
enables you to turn your computer on and off.
2.11.2 Reset (JFP1 / RESET)
Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.11.3 HDD LED (JFP2 / HDDLED)
You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is
active.
2.11.4 External speaker (JFP2 / SPEAKER)
(JFP2 / SPEAKER) is a 4-pin connector for an external speaker. If there is no exter-
nal speaker, the AIMB-210 provides an onboard buzzer as an alternative. To enable
the buzzer, set pins 3-4 as closed.