Assemble the radiation shield – DAVIS Radiation Shield (7714) User Manual

Page 12

Text mode
Original mode

Assemble the Radiation Shield

To assemble the radiation shield plates you will need the plates and studs
assembly, as well as the rest of the plates, three #8 flat washers, three #8 split lock
washers, and three plastic wing nuts.
1. Slide the three open plates and the two remaining closed plates over the

threaded stud ends protruding from the top of the plate and studs assembly.

2. Place flat washers, lock washers, and plastic wing nuts over the protruding

stud ends. Proceed to mount the shield. See “Mounting on Top of a Post:” on
page 13.

Plates and Studs

Assembly

#8 Lock Washer

#8 Flat Washer

#8 Wing Nut

Complete Plate

Assembly

Open Plate

Closed Plate

Closed Plate
with Bracket
attached