Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 69)

69
SPECIFICATIONS
pH Slope/Offset display (pH Mode only)
Slope alarm
Out of 75% to 115% (pH)
Offset alarm
Out of ±60 mV (pH)
Conductivity cell constant 1.0 (Conductivity)
Conductivity Temperature 0.0% to 10.0%/°C (Conductivity)
Coefficient (Tc)
Reference temperature
Factory set at 25°C
(Tref) (Conductivity)
TDS conversion factor
0.300 ~ 1.000 (TDS)
Non-linear compensation (Salt)
Operating temperature: 5°C to 40°C
Operating RH%: Up to 95% w/o condensation
Storage Temperature: -20°C to 60°C
Storage RH%: Up to 95% w/o condensation
Weight: 18 oz (533 g)
Dimensions:
8½” x 6½” x 2¼”
(217 x 168 x 58mm)