Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 13)

13
KEYPAD
POWER/SET
CAL/ESC
HLD/REC
MODE/▲
MEMO/▼
MN/MX/
CONFIRM
Press to turn the meter on/off. Press
and hold for more than 1 second to
enter SET Mode. The meter will default
to the last mode used when turned off
and back on.
Switch between NORMAL and
CALIBRATION Mode. Press to enter
manual temperature setting. In
Calibration, Setting or Recall Modes,
press to return to Normal Mode.
Press to freeze the reading.
Press again to release.
Press for more than 1 second to switch
between NORMAL and RECALL
Modes.
Press to switch the mode.
Press to increase the setting value.
Press to save the current reading.
Press to decrease the setting value.
Press to confirm calibration or
parameter setting.
Press to view the min/max of
the memory in Recall Mode.
Press to select AUTO or Manual
ranging when in Cond./TDS/SALT.