Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 16)

16
SETUP MODE
software associated with this feature.
2. Press SET for 2 seconds to enter setup. “TR” appears
on the middle of the LCD display and P1.0 appears
under “TR.”
3. Press . “OUT” flashes on the upper display and
P1.1 appears under “OUT.” This indicates that mem-
ories are transferring. After transmission, the LCD will
return to P1.0.
Note..
The meter can store up to 99 records for each parameter.
If you want to transmit data for a different parameter, press
MODE to select your parameter before entering setup.
Clear Memory
1. Press MODE to select the parameter you want cleared
before entering Setup Mode.
2. Press SET for 2 seconds to enter setup. Press ▲ to
select the memory clear function.
3. “CLR” appears on the middle display with P2.0 in the
lower display.