Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 25)

25
SETUP MODE
▼ to adjust the value. Press to confirm and return
to P5.0.
Ready Icon
This feature enables/disables the “READY” icon, which
indicates that the measured reading is stable.
1. Press SET for 2 seconds to enter setup.
2. Press ▲ to select “READY” on the display. P6.0 will
appear on the lower display.
3. Press to enter P6.1. “YES” will flash on the LCD
display and P6.1 will appear on the lower display.
4. Press ▲ to switch between YES or NO.
5. Press to confirm and return to P6.0.
6. Press ESC to return to Normal Mode.