Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 6)

6
INTRODUCTION
Sper Scientific is pleased to offer the following line of bench
-top meters:
Model 860031 (pH/mV)
Model 860032 (Conductivity/TDS/Salinity)
Model 860033 (Water Quality)
Please note that the meter itself is identical in each of the
above models. Each model can be used for pH/mV,
Conductivity/TDS/Salinity or Water Quality depending on
the probe used.
To utilize your meter under additional parameters, please
refer to the list of probes in OPTIONAL ACCESSORIES on
page 65.
Instructions for all three models are contained within this
manual. Refer to the TABLE OF CONTENTS for the
subsection within MEASUREMENT PROCEDURES that
corresponds to the particular parameter you are measuring.