Sper Scientific 860031 pH - mV Bench-Top Meter - Manual (Page 48)

48
MEASUREMENT PROCEDURES
2. “MEM” will appear on the LCD. The memory number
and measured value will flash and the meter will return
to Normal Mode.
Note…
Further data can not be saved once the memory is full. See
Clear Memory (page 16) to create additional space.
Recall Memory
This function recalls readings stored in the memory.
1. Press REC for more than 2 seconds to enter Recall
Mode. “REC” will flash on the LCD display.
2. Press ▲ to select the next memory content. Press ▼ to
select the previous memory.
3. Press REC for more than 2 seconds to exit memory
recall and return to Normal Mode.
Note…
All records are retained even when the meter is off. To
clear records, see page 16.