PowerTap Joule GPS User Guide - Manual (Page 67)

Dashboard to Menus
Back to Previous Screen
Menus to Dashboard
Find Sensors
Interval/Ride Mode toggle
Sleep
Ride Menu Quick Display
Metric Rotation
Quick Backlight
Shifting, Target Slope
Manual Zero
PowerBeam Calibration
Active Bike
Ride Partner (Pacer) Reset
Joule GPS User Guide page 67
Appendix E: BUTTON COMBINATIONS, SHORT CUTS and QUICK LINKS
WATTS
283 160
21 96
1:06:45
HR
MPH CAD
214 894
AV WATTS MX WATTS
RIDE TIME KJ
9:34 A 71º
780
INT
[ENTER] button
[MINUS] button
[PLUS] button
[INTERVAL] button
Button Combination, Short Cut, Or Quick Link Function
Press and hold the ENTER button for 3 seconds
When in Menus, click the INTERVAL button to move back to the previous screen. When in an edit
field click INTERVAL to move back one character; exits field when at first character.
Press and hold the ENTER button for 3 seconds, or click the Back button.
Press and hold the PLUS and MINUS buttons at simultaneously for 2 seconds.
Press and hold the INTERVAL button for 2 seconds to toggle between metric data related to
the whole ride and metric data related to the current interval/lap.
Press and hold the PLUS and INTERVAL buttons at simultaneously for 3 seconds.
Press and hold the MINUS button for 2 seconds
Press and hold the PLUS button for 2 seconds, continue hold while highlighted metric rotates.
Release when desired is in main window.
Click the MINUS and INTERVAL buttons simultaneously to turn backlight “On” temporarily,
until next sleep; additional clicks scroll through brightness settings.
When paired to an i400 series indoor cycle, use the PLUS and MINUS buttons to
increase/decrease the Target Power, Target Slope, or Gear, , when the associated window is
highlighted on Workout dashboard. Press and hold the PLUS button to move the Highlight.
A link to the Manual Zero screen of the active bike is on the Sensors menu.
A link to the PowerBeam Calibration screen appears on the Sensors menu when the active
bike definition includes an RU sensor.
The Active bike is pre-selected when entering the Sensors menu.
Choice appears on the Ride menu when a route with pacing data is active. Selecting this choice
forces the Ride Partner to be “virtually” moved to the current location of the rider.