PowerTap Joule GPS User Guide - Manual (Page 28)

Joule GPS User Guide page 28
CHAPTER 5: NAVIGATION
WAYPOINTS
For the purposes of the Joule GPS, waypoints are single specific locations on Earth. Your home, favorite trail head, or
cafe can be a waypoint. The Joule GPS can create, delete, select, and store waypoints. Each waypoint you create is
stored on the device. Each waypoint is listed by its name, a distance and direction (heading) from your current location.
A waypoint labeled “Start” is always in the list and represents the starting point of your current ride. You can select a
waypoint in your list to navigate to or create a waypoint representing your current location by selecting “New Waypoint.”
INT
[ENTER]
Press & Hold
3 sec. to enter
Menus. Scroll
to Navigation;
Press •[ENTER] ;
Select Waypoints,
Press •[ENTER]
Scroll to a Waypoint
Press •[ENTER]
FROM DASHBOARD
Main Menu
Ride
History
Sensors
Training
Navigation
User
Device
Back to Dashboard
9:34
A
71º
Navigation
Routes
Waypoints
GPS Status
Compass
Back to Main Menu
9:34
A
Waypoints
Start
Home
Tucson ride
New Waypoint
Back to Navigation
9:34
A
10.2 mi
29 mi
1388 mi
TIP: The heading arrow is accurate as long as the compass has been calibrated. The calibration
typically only has to be done once, when you first receive the unit.
For more information, refer to the Compass Calibration section at the end of this chapter.