PowerTap Joule GPS User Guide - Manual (Page 13)

Joule GPS User Guide page 13
DASHBOARD 3
Dashboard 3 is configured to display 3 metric windows (default configuration). Press the PLUS (+) or MINUS
(-) button to highlight a different metric. See Appendix C for a full list of metrics.
CHAPTER 3: DASHBOARDS
Detail View:
2 Complimentary Metrics
1:06:45
RIDE TIME
25
SPD GRADE
9:34
A
71º
A
B C
26.00 380
MILES KJ
DASHBOARD 3
METRIC 1
METRIC 1 METRIC 2 METRIC 3
SPEED
GRADE
MILES KJ
AV MPH MX WATTS
RIDE TIME
Selected Metric Detail Views
A
B
AV GRADE FT GAIN C
Press • [ENTER] to
advance through
Dashboards
INT
[ENTER]
METRIC 2 METRIC 3
5%
TIP: By holding down the + [PLUS] button for 3
seconds, any of the three related metrics can be
rotated into the primary dashboard metric position.
For example: To see total distance traveled as the
main metric, instead of Ride Time, press the [PLUS]
button until the highlighted metric is Ride Time.
Next, hold the [PLUS] button down for 3 seconds,
continue holding the button down while the metrics
are rotating. Release the button when the desired
metric is the primary or highlighted metric.
Selected metric is
highlighted in gray