PowerTap Joule GPS User Guide - Manual (Page 39)

CHAPTER 7: TRAINING
TRAINING using AUTO LAP
Auto Lap allows you to set the Joule GPS to record laps automatically during your ride based on either time , distance
traveled, or passing a specific GPS position point. The lap is automatically marked and will appear on the Interval dashboard.
Select Off to turn Auto Lap off. NOTE: Auto Lap only functions when the Joule is set to “Lap Mode” (see Device, chapter 8)
Training
Workouts
Auto Lap
Countdown
Back to Main Menu
9:34
A
Auto Lap
Mode
Time
0:10:00
Back to Training
9:34
A
Off
Distance
Time
Position
Auto Lap
Mode
Position
Position Option
Current Position
Back to Training
9:34
A
Current Position
First Interval
INT
[ENTER]
Press & Hold
3 sec. to enter
Menus. Scroll
to Training;
Press •[ENTER] ;
Select Auto Lap
FROM DASHBOARD
Joule GPS User Guide page 39
TIP: Use Auto Lap in Position Mode when participating in a criterium or cyclocross event to automatically count each lap. Set the
Position Option to “First Interval” prior to warmup. When you get to the start line press the interval button, indicating a lap will be
marked each time you pass this point (within 20-30 meters of the waypoint).
Distance
Time
Position
MODE AUTO LAP MENU OPTION
Select Distance, scroll to and enter the amount of distance you want to travel before the interval is marked.
Select Time, scroll to and enter the amount of time that you want to pass before the interval is marked.
Select Position, scroll to Position Option, press •[ENTER]. Choose either Current Position or First Interval to set
the GPS position of where the interval will be marked. Current Position indicates that each time you pass your
current position on earth an interval will be marked. Choosing First Interval indicates that the position marker
will be set when you press the interval button the first time. Each time you pass that point on earth an interval
will be marked.