JKS OGS170 User Manual
Installation instructions, Welcome, Important
JKSOGS170
JKS Rear Tackbar Relocation Bracket Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Rear Trackbar Relocation Bracket
Part Number: JKSOGS170
Applications: Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing a new Rear Trackbar
Relocation Bracket from JKS Manufacturing. We are com-
mitted to providing you with the best products available and
your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
REQUIRES 2.0-6.0” SUSPENSION LIFT.
VEHICLES LIFTED OVER 3.0” must be equipped with
adjustable rear track bar [JKS PN OGS159 or equiva-
lent] and/or adjustable upper control arms.
COMPATIBLE WITH double cardan (U-joint) CV-type or
OE Rzeppa-joint driveshaft.
NOT COMPATIBLE WITH right hand drive vehicles.
CHECK TORQUE SPECIFICATIONS regularly.
Tools Required
Hydraulic Floor Jack & Jack Stands
Metric/Standard Socket Wrench Set
Torque Wrench
Tape Measure
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036