JKS 3104 User Manual
Installation instructions, Welcome, Important

JKS3100 - JKS3104
JKS Quicker Disconnect Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Quicker Disconnect
Part Number: JKS3100 - JKS3104
Welcome
CONGRATULATIONS on purchasing a set
of new Quicker Disconnects™ from JKS Manufacturing.
We are committed to providing you with the best products
available and your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH aftermarket swaybars. Install
product with Original Equipment swaybar only.
SOME VEHICLES MAY REQUIRE extended front brake
hoses or other modifications to compensate for ad-
ditional suspension travel.
NEVER DISCONNECT swaybar when operating vehicle
on public roads.
WHEN DISCONNECTED, the Quicker Disconnects
must be completely removed from the vehicle and the
swaybar must be secured to prevent interference with
other suspension components or axle.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
15/16” Open-End Wrench
#1 Philips Screwdriver or Small Punch
Medium Strength Threadlocker
Angle Measuring Tool
Grease Gun with Zerk Fitting Coupler
Wheel Bearing Grease
Parts
Description
A
1/2" x 1-1/4” NF GR5 Bolt
B
Spherical Bushing
C
Stainless Steel Post
D
Click Pin
E
Press-In Grease Zerk
F
Grease Zerk Cap
G
Upper Male Threaded End
H
Lower Female Threaded End
I
1/2” Lock Washer
J
OE Bracket Spacer
K
1/2” x 2-1/2” NF GR5 Bolt
L
5/8” Jam Nut
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036