Ag Leader PF3000/PF3000Pro Harvest Master Mode Operators Manual - Manual (Page 2)

Using PF with HarvestMaster PF3000 and PF3000 Pro
Installation and Cable Connections Ag Leader Technology
September 2000 2
5. Attach the Battery power cable at the battery. The red wire connects to the
positive batter terminal. The black wire connects to the negative battery
terminal. Route the cable to the monitor, securing the cable away from
moving parts every 12 to 18 inches.
6. Attach the battery cable to the 25-pin port on the monitor.
7. Power up the monitor to ensure the monitor is working. If not recheck the
cable connections at the battery.