HP e-Commerce Server Accelerator sa7120 - Manual (Page 84)

C H A P T E R 5 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
74
set telnet Enables or disables Telnet sessions. When this command is set to
“enable” and an IP address is assigned to the SA7100/SA7120’s
network interface, you can access the device’s CLI via remote
Telnet session. When disabled, the device refuses Telnet
connections. The console prompts for any missing parameters.
Default: disable.
Syntax:
HP SA7120> set telnet enable
Need an IP address to start Telnet service.
Enter IP Address [209.218.240.67]: 10.1.2.124
Need a netmask to start Telnet service.
Enter Netmask [255.255.255.0]:
Optional Default Route to start Telnet service.
Enter Default Route (’none’ to delete) [none]:
Telnet Services started.
HP SA7120>
show telnet Displays current Telnet status: enabled or disabled.
Example:
HP SA7120> show telnet
Telnet: enabled
set telnet_port Set the port on which Telnet connections are accepted. (Default
port: 23.)
Syntax:
HP SA7120> set telnet_port
where is the number of the port to which Telnet sessions
will connect.
show telnet_port Display the port on which Telnet sessions are currently accepted.
Example:
HP SA7120> show telnet_port
Telnet Port Number: 23
Command Description