HP e-Commerce Server Accelerator sa7120 - Manual (Page 122)

C H A P T E R 7 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
112
Alarms can be configured to immediately notify the user of the
following conditions:
• Encryption Status change
• Refused SSL connections
• Utilization (Threshold) alarms
• Overload alarms
• Network Link Status
All alarms are disabled by default and may be enabled in any
combination.
Alarm format:
A:mm/dd/yyyy hh:mm:ss
ALARM_CODE:MODIFIER:EXTENDED_DATA:/*message*/
Where:
A: Identifies the message as an alarm (as
opposed to a monitor report).
mm/dd/yyyy hh:mm:ss The timestamp.
ALARM_CODE: The alarm type:
[ESC|RSC|UTL|OVL|NLS].
MODIFIER: The alarm modifier, a code identifying
the event that triggered the alarm.
NOTE: The Encryption
Status Change alarm
(ESC) does not display
extended data. EXTENDED_DATA: Any additional relevant data.
/*message*/: Human-readable text description of
the alarm.
The CLI commands for alarm configuration are:
For example:
HP SA7120> set alarm
Usage: set alarms [args]
all => All alarms turned on.
esc => Encryption status change alarm.
nls => Network link status alarm.
none => All alarms turned off (disabled).
ovl => Overload alarm.
Command Parameters Default
set alarm all, esc, rsc, utl, ovl, nls none
show alarm