Buttons and switches, Front panel leds – HP e-Commerce Server Accelerator sa7120 User Manual
Page 144
A P P E N D I X A HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
134
Buttons and Switches
There are two buttons and one switch on the front panel of the
SA7100/SA7120.
Front Panel LEDs
The LED display provides high-level SA7100/SA7120 information.
There are seven LEDs on the SA7100/SA7120’s front panel, in two
groups of four and three, respectively.
Button/Switch
Action
Reset button
Press momentarily to issue a soft reset to the SA7100/SA7120.
Press for 5 seconds to reset the SA7100/SA7120 and restore the
factory defaults.
Bypass button
Press to physically force bypass mode (bypass SA7100/SA7120
processing).
Fail-through/
Fail-safe switch
Default: Fail-safe (up position), the network connection is broken
during a SA7100/SA7120 failure.
Fail-through (down position), the network connection is
maintained during a SA7100/SA7120 failure. Refer to Failure/
Bypass Modes in Appendix B for details.
LED
Status
Power
ON – Power is supplied to SA7100/SA7120.
OFF – No Power to SA7100/SA7120.
Error
ON – Error condition found.
OFF – Normal operation.