HP e-Commerce Server Accelerator sa7120 - Manual (Page 100)

C H A P T E R 5 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
90
show more Display the current setting for the console display’s page length.
Default is 300.
Example:
HP SA7120> show more
Set 23 lines per page
nic Allows you to set the network interface card configuration.
Example:
HP SA7120> nic
1 - auto
2 - 10baseT, half duplex
3 - 10baseT, full duplex
4 - 100baseTX, half duplex
5 - 100baseTX, full duplex
Select media type [1]:
set prompt Change the prompt from “ HP SA7120> ” to the desired prompt.
Example:
HP SA7120> set prompt
Prompt [ HP SA7120> ]:
HP SA7120>
set serial Allows user to set the console port to monitor the CLI or the output
logging, and set the speed, data bits, stop bits, and parity bits. The
aux console port is fixed at 115200, 8, 1, N. This command returns
the user to the “password” prompt after setting the console port.
Example:
HP SA7120> set serial
Baud rate (9600/115200) [9600]:
Data bits (7/8) [8]:
Stop bits (1/2) [1]:
Parity (n/e/o) [n]:
Set serial parameters [y]:
HP SA7120>
Command Description