HP e-Commerce Server Accelerator sa7120 - Manual (Page 81)

C H A P T E R 5 Command Reference
71
inline Enables inline mode, in which the SA7100/SA7120 processes
traffic normally. (As opposed to bypass mode, in which traffic may
flow through the device unprocessed.)
Example:
HP SA7120> inline
The LED labeled “inline” on the SA7100/SA7120’s front panel is
illuminated when inline mode is enabled.
NOTE: Other factors may preclude the use of inline mode. See
Failure/Bypass Modes in Appendix B.
set route Specify the address of the router or gateway through which the
SA7100/SA7120 communicates with the Internet.
Syntax:
HP SA7120> set route
Enter Default Route (’none’ to delete) [none]:
255.255.255.001
HP SA7120>
show route Display the currently specified address of the router or gateway
through which the SA7100/SA7120 communicates with the
Internet.
Syntax:
HP SA7120> show route
Default Route: 255.255.255.001
HP SA7120>
Command Description