Displaying system information – HP 6400.8400 Enterprise Virtual Array User Manual
Page 44
•
Shutdown Options—initiates the procedure for shutting down the system in a logical, sequential
manner. Using the shutdown procedures maintains data integrity and avoids the possibility
of losing or corrupting data.
•
System Password—create a system password to ensure that only authorized personnel can
manage the storage system using HP P6000 Command View.
To enter and navigate the storage system menu tree:
1.
Press any push-button while the default display is in view. System Information becomes the
active display.
2.
Press
to sequence down through the menus.
Press
to sequence up through the menus.
Press
to select the displayed menu.
Press
to return to the previous menu.
NOTE:
To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default
display.
identifies all the menu options available within the OCP display.
CAUTION:
Many of the configuration settings available through the OCP impact the operating
characteristics of the storage system. You should not change any setting unless you understand
how it will impact system operation. For more information on the OCP settings, contact your
HP-authorized service representative.
Table 13 Menu options within the OCP display
System Password
Shutdown Options
Fault Management
System Information
Change Password
Restart
Last Fault
Versions
Clear Password
Power Off
Detail View
Host Port Config
(Sets Fabric or Direct
Connect)
Current Password
(Set or not)
Uninitialize System
Device Port Config
(Enables/disables device
ports)
I/O Module Config
(Enables/disables
auto-bypass)
Loop Recovery Config
(Enables/disables recoveries)
Unbypass Devices
UUID Unique Half
Debug Flags
Print Flags
Mastership Status (Displays
controller role — master or
slave)
Displaying system information
NOTE:
The purpose of this information is to assist the HP-authorized service representative when
servicing your system.
44
EVA6400/8400 operation