HP 6400.8400 Enterprise Virtual Array - Manual (Page 122)

Figure 34 Windows Server (64-bit) configuration
6 SAN switch 1 1 Network interconnection
7 SAN switch 2 2 Management server
8 Controller A 3 Host 1
9 Controller B 4 Host 2
5 Host 3
Oracle Solaris configuration
Requirements
•
Switch zoning or controller level SSP must be used to ensure each single path HBA has an
exclusive path to its LUNs.
•
Single path HBA server can be in the same fabric as servers with multiple HBAs.
•
Single path HBA server cannot share LUNs with any other HBAs.
•
In the use of snapshots and snapclones, the source virtual disk and all associated snapshots
and snapclones must be presented to the single path hosts that are zoned with the same
controller. In the case of snapclones, after the cloning process has completed and the clone
becomes an ordinary virtual disk, you may present that virtual disk as you would any other
ordinary virtual disk.
HBA configuration
•
Host 1 is a single path HBA host.
•
Host 2 is a multiple HBA host with multi-pathing software.
See Figure 35 (page 123) .
122 Single Path Implementation