Shock and vibration specifications – HP 6400.8400 Enterprise Virtual Array User Manual
Page 113
Table 27 EVA8400 UPS loading
% of UPS capacity
Watts
Enclosures
R12000
R5500
41.0
4920
12
36.8
98.1
4414
11
33.6
89.7
4037
10
30.5
81.3
3660
9
27.4
73.0
3284
8
24.2
64.6
2907
7
21.1
56.2
2530
6
17.9
47.9
2153
5
14.8
39.5
1777
4
11.7
31.1
1400
3
8.5
22.7
1023
2
5.4
14.4
647
1
Table 28 EVA6400 UPS loading
% of UPS capacity
Watts
Enclosures
R12000
R5500
R3000
26.8
71.4
3214
8
23.6
63.0
2837
7
20.5
54.6
91.1
2460
6
17.3
46.2
77.2
2083
5
14.2
37.9
63.2
1707
4
11.1
29.5
49.3
1330
3
7.9
21.2
35.3
953
2
4.8
12.8
21.4
577
1
Shock and vibration specifications
lists the product operating shock and vibration specifications. This information
applies to products weighing 45 Kg (100 lbs) or less.
NOTE:
HP EVA P6000 products are designed and tested to withstand the operational shock and
vibration limits specified in
. Transmission of site vibrations through non-HP
racks exceeding these limits could cause operational failures of the system components.
Table 29 Operating Shock/Vibration
Shock test with half sine pulses of 10 G magnitude and 10 ms duration applied in all three axes (both positive and
negative directions).
Sine sweep vibration from 5 Hz to 500 Hz to 5 Hz at 0.1 G peak, with 0.020” displacement limitation below 10
Hz. Sweep rate of 1 octave/minute. Test performed in all three axes.
Environmental and operating specifications
113