HP 6400.8400 Enterprise Virtual Array - Manual (Page 14)

Figure 9 HSV450 controller rear view
6. DPI ports 1. Serial port
7. Mirror ports 2. Unit ID
8. Fiber ports 3. Controller health
9. Power supply 1 4. Fault indicator
10. Power supply 2 5. Power
Figure 10 Controller front view
5. Operator Control Panel (OCP) 1. Battery 1
6. Status indicators 2. Battery 2
7. Unit ID 3. Blower 1
4. Blower 2
Operator control panel
The operator control panel (OCP) provides a direct interface to each controller. From the OCP you
can display storage system status and configuration information, shut down the storage system,
and manage the password.
The OCP includes a 40-character LCD alphanumeric display, six push-buttons, and five status
indicators. See
Figure 11 (page 15) .
HP P6000 Command View is the tool you will typically use to display storage system status and
configuration information or perform the tasks available from the OCP. However, if HP P6000
Command View is not available, the OCP can be used to perform these tasks.
14 EVA6400/8400 hardware