HP Netserver L Server series User Manual

Page 76

Text mode
Original mode

Chapter 8

Connecting the Monitor, Keyboard, Mouse, and UPS

NOTE

If you have a console switch box, refer to the switch box's user
guide for instructions on connecting the keyboard, mouse, and
monitor.

2. If you have a UPS (Uninterruptible Power Supply) installed in the rack,

turn it on. Use the supplied serial cable to connect the UPS to the HP
NetServer. Refer to the user guide included with the UPS, and to the HP
NetServer Rack Installation Road Map, for additional information.

3. Plug the monitor power cord into the power supply.