HP Integrity BL870c Server-Blade - Manual (Page 25)

1. For the seismic rack: Turn the quarter-turn fasteners securing the kickplate. Pull the kickplate
away from the base of the rack.
For the seismic rack R2: Use a T30 torx screwdriver to unscrew the six screws securing the
kickplate. Pull the kickplate away from the base of the rack.
2. Disconnect the ground wire from the kickplate using a 10 mm socket wrench.
To reinstall the kickplate, reverse the procedure.
Disconnecting the Seismic Rack From the Pallet
WARNING! Racks are extremely heavy and prone to tipping when not anchored to the shipping
pallet or the floor. Use caution and follow all instructions carefully. Never attempt to move a rack
alone.
The rack should be near the installation location before performing this procedure.
NOTE: To allow easier access to the bottom of the rack, remove the rack door. See “Removing
the Rack Door” (page 22)
To disconnect the rack from the shipping pallet:
Unpacking and Moving the Seismic Rack 25