HP IMC Branch Intelligent Management Software - Manual (Page 21)

Modify file transfer type
This function allows you to modify the protocol, HTTP or HTTPS, used for transferring files between
the specified CPE and the BIMS server. The default protocol is HTTP.
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click a CPE name in the CPE list to display the page containing the CPE details.
3. If the CPE uses HTTPS to access BIMS, a Modify File Transfer Type link is provided in the right
configuration pane. Click the link to launch the Modify File Transfer Type dialog box.
4. Select HTTP or HTTPS as the transfer type.
5. Click OK.
Data model
Use this function to view and configure the properties and parameters of the data nodes supported
by the CPE.
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click a CPE name in the CPE list to display the page containing the CPE details.
3. Click Data Model in the right configuration pane, and the data model window displays.
4. Select one or more nodes from the data model tree. Right-click to display the options. Select
Get Parameter Values, Set Parameter Values, Get Parameter Attributes, or Set Parameter
Attributes for the selected nodes.
5. Select one node from the data model tree. Right-click to display the options, and select
Properties to see the properties of the node.
WAN IP connection management
This module allows you to manage the WAN IP connection of the selected device. You can query
WAN IP connections , view WAN IP connection details , add or modify WAN IP connections , and
delete WAN IP connections .
The following parameters can be specified in managing WAN IP connections:
•
Enable Status: Connection status, enabled or disabled. The default is Disable.
•
Connection Type: Select the values of the connection instance, including Unconfigured,
IP_Routed, and IP_Bridged.
•
Auto Disconnection Time: The CPE disconnects the connection after the connection is established
for this period of time, in seconds. This time is an unsigned integer and 0 indicates that the
CPE does not cut the connection automatically.
•
Idle Disconnection Time: The CPE disconnects the connection after the connection is idle for
this period of time, in seconds. This time is an unsigned integer and 0 indicates that the CPE
does not cut the connection automatically.
•
NAT Enable: Indicates whether NAT is enabled or not.
•
Address Type: Method for assigning an IP address to the WAN-side interface of the connection,
including DHCP and Static.
•
External IP Address: External IP address to be used by NAT.
•
Subnet Mask: The configuration of the subnet mask of the WAN-side interface. This parameter
can be configured only when the
Address Type is Static.
•
Default Gateway: IP address of the default gateway. This parameter can be configured only
when the
Address Type is Static.
CPE management tasks 21