HP IMC Branch Intelligent Management Software - Manual (Page 19)

Method 2
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Select one or more CPE, and then click IP Ping Test to display the IP Ping Test page .
3. Set IP ping parameters, and click Test in the right configuration pane to run the test.
Method 3
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click a CPE name to display the information page for the selected CPE.
3. Click the IP Ping Test link at the right configuration pane to display the IP Ping Test page.
4. Set IP ping parameters, and click Test.
Method 4
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click of a CPE group to enter its subgroup/CPE list page.
If there are CPEs, click the icon of a CPE in the Operation column and select IP Ping Test to
display the IP Ping Test page.
3. Set IP ping parameters, and click Test.
Method 5
1.
Select the Service tab, and click Resource > Batch Operate in the BIMS navigation tree to
display the Batch Operate page.
2. Click IP Ping Test to display the IP Ping Test page.
3. Set IP ping parameters, select the CPEs to be tested, and then click Test.
Open Web Manager
This function allows you to open the CPE Web Manager. Use one of the methods below.
NOTE: The CPE must support web service functionality, and have this functionality enabled.
Method 1
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click in the Operation column for the target CPE, and select Open Web Manager.
Method 2
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click the name link of the target CPE.
3. Click Open Web Manager in the right configuration pane.
View CPE details
This function allows you to view CPE details.
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
CPE management tasks 19