Sim reporting – HP XP Business Copy Software User Manual
Page 110
the HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes for the list of error
codes and corrective actions.
Figure 50 Error Dialog Box
SIM Reporting
The storage system reports a service information message (SIM) to the host when it is necessary to
notify the user of a possible service requirement for the storage system. The SIMs are classified
according to severity for reporting and logging purposes:
1.
Service
2.
Moderate
3.
Serious
4.
Acute
The larger the number becomes, more the message becomes important. The SVP reports all SIMs
related to SIz operations, and all SIMs are stored on the SVP for use by HP personnel. The SIMs
reported to the zSeries and S/390 host are logged in the SYS1.LOGREC dataset of the host
operating system. Each time a SIM is generated, the amber Message LED on the control panel
(under the Ready and Alarm LEDs) turns on as an additional alert for the user. The Remote Web
Console computer also displays the SIMs to provide an additional source of notification for the
user.
For further information on SIM reporting contact your HP service representative or HP technical
support.
shows a typical 32-byte SIM from the storage system.
Figure 51 Typical SIM Showing Reference Code and SIM Type
SIMs are displayed on the host console by reference code (RC) and severity. The six-digit RC
(composed of bytes 22, 23, and 13) identifies the possible error and determines the severity. The
SIM type (byte 28) indicates the component which experienced the error.
shows the DKC SIM (byte 28 = F1) related to SIz operations.
110
Troubleshooting